rmkit.1
NAME
rmkit - Remove Kits from xCAT
SYNOPSIS
rmkit [-? | -h | --help] [-v | --version]
rmkit [-V | --verbose] [-f | --force] [-t | --test] kitlist
DESCRIPTION
The rmkit command removes kits on the xCAT management node from kit names.
Note: The xCAT support for Kits is only available for Linux operating systems.
OPTIONS
-h|--help
Display usage message.
-V|--verbose
Verbose mode.
-v|--version
Command version.
-f|--force
Remove this kit even there is any component in this kit is listed by osimage.kitcomponents. If this option is not specified, this kit will not be removed if any kit components listed in an osimage.kitcomponents
-t|--test
Test if kitcomponents in this kit are used by osimage
kitlist
A comma delimited list of kits that are to be removed from the xCAT cluster. Each entry can be a kitname or kit basename. For kit basename, rmkit command will remove all the kits that have that kit basename.
RETURN VALUE
0 The command completed successfully.
1 An error has occurred.
EXAMPLES
To remove two kits from tarball files.
rmkit kit-test1,kit-test2
Output is similar to:
Kit kit-test1-1.0-Linux,kit-test2-1.0-Linux was successfully removed.
To remove two kits from tarball files even the kit components in them are still being used by osimages.
rmkit kit-test1,kit-test2 --force
Output is similar to:
Kit kit-test1-1.0-Linux,kit-test2-1.0-Linux was successfully removed.
To list kitcomponents in this kit used by osimage
rmkit kit-test1,kit-test2 -t
Output is similar to:
kit-test1-kitcomp-1.0-Linux is being used by osimage osimage-test
Following kitcomponents are in use: kit-test1-kitcomp-1.0-Linux
SEE ALSO
lskit(1)|lskit.1, addkit(1)|addkit.1, addkitcomp(1)|addkitcomp.1, rmkitcomp(1)|rmkitcomp.1, chkkitcomp(1)|chkkitcomp.1