discoverydata.5¶
NAME¶
discoverydata - a table in the xCAT database.
SYNOPSIS¶
discoverydata Attributes: uuid, node, method, discoverytime, arch, cpucount, cputype, memory, mtm, serial, nicdriver, nicipv4, nichwaddr, nicpci, nicloc, niconboard, nicfirm, switchname, switchaddr, switchdesc, switchport, otherdata, comments, disable
DESCRIPTION¶
Discovery data which sent from genesis.
discoverydata Attributes:¶
uuid
The uuid of the node which send out the discovery request.
node
The node name which assigned to the discovered node.
method
The method which handled the discovery request. The method could be one of: switch, blade, profile, sequential.
discoverytime
The last time that xCAT received the discovery message.
arch
The architecture of the discovered node. e.g. x86_64.
cpucount
The number of cores multiply by threads core supported for the discovered node. e.g. 192.
cputype
The cpu type of the discovered node. e.g. Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz
memory
The memory size of the discovered node. e.g. 198460852
mtm
The machine type model of the discovered node. e.g. 786310X
serial
The serial number of the discovered node. e.g. 1052EFB
nicdriver
The driver of the nic. The value should be comma separated <nic name!driver name>. e.g. eth0!be2net,eth1!be2net
nicipv4
The ipv4 address of the nic. The value should be comma separated <nic name!ipv4 address>. e.g. eth0!10.0.0.212/8
nichwaddr
The hardware address of the nic. The should will be comma separated <nic name!hardware address>. e.g. eth0!34:40:B5:BE:DB:B0,eth1!34:40:B5:BE:DB:B4
nicpci
The pic device of the nic. The value should be comma separated <nic name!pci device>. e.g. eth0!0000:0c:00.0,eth1!0000:0c:00.1
nicloc
The location of the nic. The value should be comma separated <nic name!nic location>. e.g. eth0!Onboard Ethernet 1,eth1!Onboard Ethernet 2
niconboard
The onboard info of the nic. The value should be comma separated <nic name!onboard info>. e.g. eth0!1,eth1!2
nicfirm
The firmware description of the nic. The value should be comma separated <nic name!fimware description>. e.g. eth0!ServerEngines BE3 Controller,eth1!ServerEngines BE3 Controller
switchname
The switch name which the nic connected to. The value should be comma separated <nic name!switch name>. e.g. eth0!c909f06sw01
switchaddr
The address of the switch which the nic connected to. The value should be comma separated <nic name!switch address>. e.g. eth0!192.168.70.120
switchdesc
The description of the switch which the nic connected to. The value should be comma separated <nic name!switch description>. e.g. eth0!IBM Flex System Fabric EN4093 10Gb Scalable Switch, flash image: version 7.2.6, boot image: version 7.2.6
switchport
The port of the switch that the nic connected to. The value should be comma separated <nic name!switch port>. e.g. eth0!INTA2
otherdata
The left data which is not parsed to specific attributes (The complete message comes from genesis)
comments
Any user-written notes.
disable
Set to ‘yes’ or ‘1’ to comment out this row.
SEE ALSO¶
nodels(1), chtab(8), tabdump(8), tabedit(8)