discoverydata.5

NAME

discoverydata - a table in the xCAT database.

SYNOPSIS

discoverydata Attributes: uuid, node, method, discoverytime, arch, cpucount, cputype, memory, mtm, serial, nicdriver, nicipv4, nichwaddr, nicpci, nicloc, niconboard, nicfirm, switchname, switchaddr, switchdesc, switchport, otherdata, comments, disable

DESCRIPTION

Discovery data which sent from genesis.

discoverydata Attributes:

uuid

The uuid of the node which send out the discovery request.

node

The node name which assigned to the discovered node.

method

The method which handled the discovery request. The method could be one of: switch, blade, profile, sequential.

discoverytime

The last time that xCAT received the discovery message.

arch

The architecture of the discovered node. e.g. x86_64.

cpucount

The number of cores multiply by threads core supported for the discovered node. e.g. 192.

cputype

The cpu type of the discovered node. e.g. Intel(R) Xeon(R) CPU E5-2690 0 @ 2.90GHz

memory

The memory size of the discovered node. e.g. 198460852

mtm

The machine type model of the discovered node. e.g. 786310X

serial

The serial number of the discovered node. e.g. 1052EFB

nicdriver

The driver of the nic. The value should be comma separated <nic name!driver name>. e.g. eth0!be2net,eth1!be2net

nicipv4

The ipv4 address of the nic. The value should be comma separated <nic name!ipv4 address>. e.g. eth0!10.0.0.212/8

nichwaddr

The hardware address of the nic. The should will be comma separated <nic name!hardware address>. e.g. eth0!34:40:B5:BE:DB:B0,eth1!34:40:B5:BE:DB:B4

nicpci

The pic device of the nic. The value should be comma separated <nic name!pci device>. e.g. eth0!0000:0c:00.0,eth1!0000:0c:00.1

nicloc

The location of the nic. The value should be comma separated <nic name!nic location>. e.g. eth0!Onboard Ethernet 1,eth1!Onboard Ethernet 2

niconboard

The onboard info of the nic. The value should be comma separated <nic name!onboard info>. e.g. eth0!1,eth1!2

nicfirm

The firmware description of the nic. The value should be comma separated <nic name!fimware description>. e.g. eth0!ServerEngines BE3 Controller,eth1!ServerEngines BE3 Controller

switchname

The switch name which the nic connected to. The value should be comma separated <nic name!switch name>. e.g. eth0!c909f06sw01

switchaddr

The address of the switch which the nic connected to. The value should be comma separated <nic name!switch address>. e.g. eth0!192.168.70.120

switchdesc

The description of the switch which the nic connected to. The value should be comma separated <nic name!switch description>. e.g. eth0!IBM Flex System Fabric EN4093 10Gb Scalable Switch, flash image: version 7.2.6, boot image: version 7.2.6

switchport

The port of the switch that the nic connected to. The value should be comma separated <nic name!switch port>. e.g. eth0!INTA2

otherdata

The left data which is not parsed to specific attributes (The complete message comes from genesis)

comments

Any user-written notes.

disable

Set to ‘yes’ or ‘1’ to comment out this row.

SEE ALSO

nodels(1), chtab(8), tabdump(8), tabedit(8)