switch.5¶
NAME¶
switch - a table in the xCAT database.
SYNOPSIS¶
switch Attributes: node, switch, port, vlan, interface, comments, disable
DESCRIPTION¶
Contains what switch port numbers each node is connected to.
switch Attributes:¶
node
The node name or group name.
switch
The switch hostname.
port
The port number in the switch that this node is connected to. On a simple 1U switch, an administrator can generally enter the number as printed next to the ports, and xCAT will understand switch representation differences. On stacked switches or switches with line cards, administrators should usually use the CLI representation (i.e. 2/0/1 or 5/8). One notable exception is stacked SMC 8848M switches, in which you must add 56 for the proceeding switch, then the port number. For example, port 3 on the second switch in an SMC8848M stack would be 59
vlan
The ID for the tagged vlan that is created on this port using mkvlan and chvlan commands.
interface
The interface name from the node perspective. For example, eth0. For the primary nic, it can be empty, the word “primary” or “primary:ethx” where ethx is the interface name.
comments
Any user-written notes.
disable
Set to ‘yes’ or ‘1’ to comment out this row.
SEE ALSO¶
nodels(1), chtab(8), tabdump(8), tabedit(8)