mkvm.1¶
NAME¶
mkvm - Creates HMC-, DFM-, IVM-, KVM-, VMware-, and zVM-managed partitions or virtual machines.
SYNOPSIS¶
For PPC (with HMC) specific:¶
mkvm [-V| --verbose] noderange -i id -l singlenode
mkvm [-V| --verbose] noderange -c destcec -p profile
mkvm [-V| --verbose] noderange --full
For PPC (using Direct FSP Management) specific:¶
mkvm noderange [--full]
mkvm noderange [vmcpus= min/req/max] [vmmemory= min/req/max] [vmphyslots= drc_index1,drc_index2…] [vmothersetting= hugepage:N,bsr:N] [vmnics= vlan1[,vlan2..]] [vmstorage= N|viosnode:slotid] [--vios]
For KVM:¶
mkvm noderange [-s|--size disksize] [--mem memsize] [--cpus cpucount] [-f|--force]
For VMware:¶
mkvm noderange [-s | --size disksize] [--mem memsize] [--cpus cpucount]
For zVM:¶
mkvm noderange [directory_entry_file_path]
mkvm noderange [source_virtual_machine] [pool= disk_pool]
DESCRIPTION¶
For PPC (with HMC) specific:¶
The first form of mkvm command creates new partition(s) with the same profile/resources as the partition specified by singlenode. The -i and noderange specify the starting numeric partition number and the noderange for the newly created partitions, respectively. The LHEA port numbers and the HCA index numbers will be automatically increased if they are defined in the source partition.
The second form of this command duplicates all the partitions from the source specified by profile to the destination specified by destcec. The source and destination CECs can be managed by different HMCs.
Make sure the nodes in the noderange is defined in the nodelist table and the mgt is set to ‘hmc’ in the nodehm table before running this command.
Note that the mkvm command currently only supports creating standard LPARs, not virtual LPARs working with VIOS server.
For PPC (using Direct FSP Management) specific:¶
With option --full, a partition using all the resources on a normal power machine will be created.
If no option is specified, a partition using the parameters specified with attributes such as vmcpus, vmmemory, vmphyslots, vmothersetting, vmnics, vmstorage will be created. Those attributes can either be specified with ‘*def’ commands running before or be specified with this command.
For KVM and VMware:¶
The mkvm command creates a new virtual machine with disksize GB of storage space, memsize MB of memory, and cpucount cpu(s).
For zVM:¶
The first form of mkvm creates a new virtual machine based on a directory entry.
The second form of this creates a new virtual machine with the same profile/resources as the specified node (cloning).
OPTIONS¶
-h|--help
Display usage message.
-c
The cec (fsp) name for the destination.
--cpus
Number of CPUs for the kvm/vmware virtual machine being created.
--full
Request to create a new full system partition for each CEC.
vmcpus= value vmmemory= value vmphyslots= value vmothersetting= value vmnics= value vmstorage= value [--vios]
To specify the parameters which are used to create a partition. The vmcpus, vmmemory are necessary, and the value specified with this command have a more high priority. If the value of any of the three options is not specified, the corresponding value specified for the node object will be used. If any of the three attributes is neither specified with this command nor specified with the node object, error information will be returned. To reference to lsvm(1)|lsvm.1 for more information about ‘drc_index’ for vmphyslots.
The option vios is used to specify the partition that will be created is a VIOS partition. If specified, the value for vmstorage shall be number which indicate the number of vSCSI server adapter will be created, and if no value specified for vmphyslots, all the physical slot of the power machine will be assigned to VIOS partition. If not specified, it shall be in form of vios_name:server_slotid to specify the vios and the virtual slot id of the vSCSI server adapter that will be connected from the Logical partition.
-f|--force
If the storage already exists, remove it before creating a new virtual machine.
-i
Starting numeric id of the newly created partitions.
-l
The partition name of the source.
--mem
Set the memory size for kvm/vmware virtual machines, default unit is MB. Specify in MB or append K for KB, M for MB, or G for GB.
-p
The file that contains the profiles for the source partitions.
-s|--size
Set the storage size for kvm/vmware virtual machines, default unit is GB. Specify in GB or append K for KB, M for MB, G for GB.
-v|--version
Command Version.
-V|--verbose
Verbose output.
EXAMPLES¶
- To create a new HMC-managed partition lpar5 based on the profile/resources of lpar4, enter:
mkdef -t node -o lpar5 mgt=hmc groups=all
then:
mkvm lpar5 -i 5 -l lpar4
Output is similar to:
lpar5: Success
- To create new HMC-managed partitions lpar5-lpar8 based on the profile/resources of lpar4, enter:
mkdef -t node -o lpar5-lpar8 mgt=hmc groups=all
then:
mkvm lpar5-lpar8 -i 5 -l lpar4
Output is similar to:
lpar5: Success
lpar6: Success
lpar7: Success
lpar8: Success
- To duplicate all the HMC-managed partitions associated with cec01 on cec02, first save the lpars from cec01 to a file:
lsvm lpar01-lpar04 > /tmp/myprofile
then create lpars on cec02:
mkvm lpar05-lpar08 -c cec02 -p /tmp/myprofile
Output is similar to:
lpar5: Success
lpar6: Success
lpar7: Success
lpar8: Success
- To duplicate all the HMC-managed partitions associated with cec01 on cec02, one is for cec01, the other is for cec02:
mkdef -t node -o lpar5,lpar6 mgt=hmc groups=all
chtab node=lpar5 ppc.parent=cec01
chtab node=lpar6 ppc.parent=cec02
then create lpars on cec01 and cec02:
mkvm lpar5,lpar6 --full
Output is similar to:
lpar5: Success
lpar6: Success
- To create a new zVM virtual machine (gpok3) based on a directory entry:
mkvm gpok3 /tmp/dirEntry.txt
Output is similar to:
gpok3: Creating user directory entry for LNX3... Done
- To clone a new zVM virtual machine with the same profile/resources as the specified node:
mkvm gpok4 gpok3 pool=POOL1
Output is similar to:
gpok4: Cloning gpok3
gpok4: Linking source disk (0100) as (1100)
gpok4: Linking source disk (0101) as (1101)
gpok4: Stopping LNX3... Done
gpok4: Creating user directory entry
gpok4: Granting VSwitch (VSW1) access for gpok3
gpok4: Granting VSwitch (VSW2) access for gpok3
gpok4: Adding minidisk (0100)
gpok4: Adding minidisk (0101)
gpok4: Disks added (2). Disks in user entry (2)
gpok4: Linking target disk (0100) as (2100)
gpok4: Copying source disk (1100) to target disk (2100) using FLASHCOPY
gpok4: Mounting /dev/dasdg1 to /mnt/LNX3
gpok4: Setting network configuration
gpok4: Linking target disk (0101) as (2101)
gpok4: Copying source disk (1101) to target disk (2101) using FLASHCOPY
gpok4: Powering on
gpok4: Detatching source disk (0101) at (1101)
gpok4: Detatching source disk (0100) at (1100)
gpok4: Starting LNX3... Done
- To create a new kvm/vmware virtual machine with 20 GB of storage, 4096 MB of memory, and 2 cpus.
mkvm vm1 -s 20 --mem 4096 --cpus 2
or
mkvm vm1 -s 20G --mem 4194304K --cpus 2
or
mkvm vm1 -s 20480M --mem 4096M --cpus 2
or
mkvm vm1 -s 20971520K --mem 4G --cpus 2
- To create a full partition on normal power machine.
First, define a node object:
mkdef -t node -o lpar1 mgt=fsp cons=fsp nodetype=ppc,osi id=1 hcp=cec parent=cec hwtype=lpar groups=lpar,all
Then, create the partition on the specified cec.
mkvm lpar1 --full
The output is similar to:
lpar1: Done
To query the resources allocated to node ‘lpar1’
lsvm lpar1
The output is similar to:
lpar1: Lpar Processor Info:
Curr Processor Min: 1.
Curr Processor Req: 16.
Curr Processor Max: 16.
lpar1: Lpar Memory Info:
Curr Memory Min: 0.25 GB(1 regions).
Curr Memory Req: 30.75 GB(123 regions).
Curr Memory Max: 32.00 GB(128 regions).
lpar1: 1,519,U78AA.001.WZSGVU7-P1-C7,0x21010207,0xffff(Empty Slot)
lpar1: 1,518,U78AA.001.WZSGVU7-P1-C6,0x21010206,0xffff(Empty Slot)
lpar1: 1,517,U78AA.001.WZSGVU7-P1-C5,0x21010205,0xffff(Empty Slot)
lpar1: 1,516,U78AA.001.WZSGVU7-P1-C4,0x21010204,0xffff(Empty Slot)
lpar1: 1,514,U78AA.001.WZSGVU7-P1-C19,0x21010202,0xffff(Empty Slot)
lpar1: 1,513,U78AA.001.WZSGVU7-P1-T7,0x21010201,0xc03(USB Controller)
lpar1: 1,512,U78AA.001.WZSGVU7-P1-T9,0x21010200,0x104(RAID Controller)
lpar1: 1/2/2
lpar1: 256.
Note: The ‘parent’ attribute for node ‘lpar1’ is the object name of physical power machine that the full partition will be created on.
- To create a partition using some of the resources on normal power machine.
Option 1:
After a node object is defined, the resources that will be used for the partition shall be specified like this:
chdef lpar1 vmcpus=1/4/16 vmmemory=1G/4G/32G vmphyslots=0x21010201,0x21010200 vmothersetting=bsr:128,hugepage:2
Then, create the partition on the specified cec.
mkvm lpar1
Option 2:
mkvm lpar1 vmcpus=1/4/16 vmmemory=1G/4G/32G vmphyslots=0x21010201,0x21010200 vmothersetting=bsr:128,hugepage:2
The output is similar to:
lpar1: Done
Note: The ‘vmplyslots’ specify the drc index of the physical slot device. Every drc index shall be delimited with ‘,’. The ‘vmothersetting’ specify two kinds of resource, bsr(Barrier Synchronization Register) specified the num of BSR arrays, hugepage(Huge Page Memory) specified the num of huge pages.
To query the resources allocated to node ‘lpar1’
lsvm lpar1
The output is similar to:
lpar1: Lpar Processor Info:
Curr Processor Min: 1.
Curr Processor Req: 4.
Curr Processor Max: 16.
lpar1: Lpar Memory Info:
Curr Memory Min: 1.00 GB(4 regions).
Curr Memory Req: 4.00 GB(16 regions).
Curr Memory Max: 32.00 GB(128 regions).
lpar1: 1,513,U78AA.001.WZSGVU7-P1-T7,0x21010201,0xc03(USB Controller)
lpar1: 1,512,U78AA.001.WZSGVU7-P1-T9,0x21010200,0x104(RAID Controller)
lpar1: 1/2/2
lpar1: 128.
- To create a vios partition using some of the resources on normal power machine.
mkvm viosnode vmcpus=1/4/16 vmmemory=1G/4G/32G vmphyslots=0x21010201,0x21010200 vmnics=vlan1 vmstorage=5 --vios
The resources for the node is similar to:
viosnode: Lpar Processor Info:
Curr Processor Min: 1.
Curr Processor Req: 4.
Curr Processor Max: 16.
viosnode: Lpar Memory Info:
Curr Memory Min: 1.00 GB(4 regions).
Curr Memory Req: 4.00 GB(16 regions).
Curr Memory Max: 32.00 GB(128 regions).
viosnode: 1,513,U78AA.001.WZSGVU7-P1-T7,0x21010201,0xc03(USB Controller)
viosnode: 1,512,U78AA.001.WZSGVU7-P1-T9,0x21010200,0x104(RAID Controller)
viosnode: 1,0,U8205.E6B.0612BAR-V1-C,0x30000000,vSerial Server
viosnode: 1,1,U8205.E6B.0612BAR-V1-C1,0x30000001,vSerial Server
viosnode: 1,3,U8205.E6B.0612BAR-V1-C3,0x30000003,vEth (port_vlanid=1,mac_addr=4211509276a7)
viosnode: 1,5,U8205.E6B.0612BAR-V1-C5,0x30000005,vSCSI Server
viosnode: 1,6,U8205.E6B.0612BAR-V1-C6,0x30000006,vSCSI Server
viosnode: 1,7,U8205.E6B.0612BAR-V1-C7,0x30000007,vSCSI Server
viosnode: 1,8,U8205.E6B.0612BAR-V1-C8,0x30000008,vSCSI Server
viosnode: 1,9,U8205.E6B.0612BAR-V1-C9,0x30000009,vSCSI Server
viosnode: 0/0/0
viosnode: 0.
FILES¶
/opt/xcat/bin/mkvm
SEE ALSO¶
chvm(1)|chvm.1, lsvm(1)|lsvm.1, rmvm(1)|rmvm.1