rsetboot.1
SYNOPSIS
rsetboot noderange [hd | net | cd | default | stat] [-u] [-p]
rsetboot [-h | --help | -v | --version | -V | --verbose]
DESCRIPTION
rsetboot sets the boot media and boot mode that should be used on the next boot of the specified nodes. After the nodes are booted with the specified device and boot mode (e.g. via rpower(1)|rpower.1), the nodes will return to using the default boot device specified in the BIOS.
OPTIONS
hd
Boot from the hard disk.
net
Boot over the network, using a PXE or BOOTP broadcast.
cd
Boot from the CD or DVD drive.
def | default
Boot using the default set in BIOS.
stat
Display the current boot setting.
-u
To specify the next boot mode to be “UEFI Mode”. (Not supported for OpenBMC)
-p
To make the specified boot device and boot mode settings persistent.
EXAMPLES
Set nodes 1 and 3 to boot from the network on the next boot:
rsetboot node1,node3 net
Display the next-boot value for nodes 14-56 and 70-203:
rsetboot node[14-56],node[70-203] stat
Or:
rsetboot node[14-56],node[70-203]
Restore the next-boot value for these nodes back to their default set in the BIOS:
rsetboot node1,node3,node[14-56],node[70-203] default
SEE ALSO
rbootseq(1)|rbootseq.1