rinv.1

Name

rinv - Remote hardware inventory

Synopsis

rinv [-h | --help | -v | --version]

BMC/MPA specific:

rinv noderange [model | serial | asset | vpd | deviceid | guid | firm | dimm | mprom | all]

OpenPOWER (IPMI) server specific:

rinv noderange [model | serial | deviceid | uuid | guid | vpd | mprom | firm | all]

OpenPOWER (OpenBMC) server specific:

rinv noderange [model][serial][firm][cpu][dimm][all] [-V | --verbose]

PPC (with HMC) specific:

rinv noderange {bus | config | serial | model | firm | all}

PPC (using Direct FSP Management) specific:

rinv noderange {firm}

rinv noderange {deconfig [-x]}

Blade specific:

rinv noderange {mtm | serial | mac | bios | diag | mprom | mparom | firm | all}

VMware specific:

rinv noderange [-t]

pdu specific:

rinv noderange

zVM specific:

rinv noderange [config | all]

rinv noderange [--diskpoolspace]

rinv noderange [--diskpool pool space]

rinv noderange [--fcpdevices state details]

rinv noderange [--diskpoolnames]

rinv noderange [--networknames]

rinv noderange [--network name]

rinv noderange [--ssi]

rinv noderange [--smapilevel]

rinv noderange [--wwpns fcp_channel]

rinv noderange [--zfcppool pool space]

rinv noderange [--zfcppoolnames]

Description

rinv retrieves hardware configuration information from the on-board Service Processor for a single or range of nodes and groups.

Calling rinv for VMware will display the UUID/GUID, number of CPUs, amount of memory, the MAC address and a list of Hard disks. The output for each Hard disk includes the label, size and backing file location.

Options

bus

List all buses for each I/O slot.

config

Retrieves number of processors, speed, total memory, and DIMM locations.

model

Retrieves model number.

serial

Retrieves serial number.

firm

Retrieves firmware versions.

deconfig

Retrieves deconfigured resources. Deconfigured resources are hw components (cpus, memory, etc.) that have failed so the firmware has automatically turned those components off. This option is only capable of listing some of the deconfigured resources and should not be the only method used to check the hardware status.

-x

To output the raw information of deconfigured resources for CEC.

asset

Retrieves asset tag. Usually it’s the MAC address of eth0.

vpd

Same as specifying model, serial, deviceid, and mprom.

diag

Diagnostics information of firmware.

mprom

Retrieves mprom firmware level.

dimm

Retrieves dual in-line memory module information.

deviceid

Retrieves device identification. Usually device, manufacturing and product IDs.

uuid

Retrieves the universally unique identifier.

guid

Retrieves the global unique identifier .

all

All of the above.

-h | --help

Print help.

-v | --version

Print version.

-V | --verbose

Prints verbose output, if available.

-t

Set the values in the vm table to what vCenter has for the indicated nodes.

zVM specific :

--diskpoolspace

Calculates the total size of every known storage pool.

--diskpool pool space

Lists the storage devices (ECKD and FBA) contained in a disk pool. Space can be: all, free, or used.

--fcpdevices state details

Lists the FCP device channels that are active, free, or offline. State can be: active, free, or offline.

--diskpoolnames

Lists the known disk pool names.

--networknames

Lists the known network names.

--network name

Shows the configuration of a given network device.

--ssi

Obtain the SSI and system status.

--smapilevel

Obtain the SMAPI level installed on the z/VM system.

--wwpns fcp_channel

Query a given FCP device channel on a z/VM system and return a list of WWPNs.

--zfcppool pool space

List the SCSI/FCP devices contained in a zFCP pool. Space can be: free or used.

--zfcppoolnames

List the known zFCP pool names.

Examples

1. To retrieve all information available from blade node4, enter:

rinv node5 all

Output is similar to:

node5: Machine Type/Model 865431Z
node5: Serial Number 23C5030
node5: Asset Tag 00:06:29:1F:01:1A
node5: PCI Information
node5:  Bus  VendID  DevID    RevID  Description              Slot Pass/Fail
node5:  0    1166    0009     06     Host Bridge              0      PASS
node5:  0    1166    0009     06     Host Bridge              0      PASS
node5:  0    5333    8A22     04     VGA Compatible Controller0      PASS
node5:  0    8086    1229     08     Ethernet Controller      0      PASS
node5:  0    8086    1229     08     Ethernet Controller      0      PASS
node5:  0    1166    0200     50     ISA Bridge               0      PASS
node5:  0    1166    0211     00     IDE Controller           0      PASS
node5:  0    1166    0220     04     Universal Serial Bus     0      PASS
node5:  1    9005    008F     02     SCSI Bus Controller      0      PASS
node5:  1    14C1    8043     03     Unknown Device Type      2      PASS
node5: Machine Configuration Info
node5: Number of Processors:
node5: Processor Speed: 866 MHz
node5: Total Memory:   512 MB
node5: Memory DIMM locations:  Slot(s)  3  4

2. To output the raw information of deconfigured resources for CEC cec01, enter:

rinv cec01 deconfig -x

Output is similar to:

cec01:
<SYSTEM>
<System_type>IH</System_type>
<NODE>
<Location_code>U78A9.001.0123456-P1</Location_code>
<RID>800</RID>
</NODE>
</SYSTEM>

3. To retrieve ‘config’ information from the HMC-managed LPAR node3, enter:

   rinv node3 config
   

   Output is similar to:

   node5: Machine Configuration Info
   node5: Number of Processors: 1
   node5: Total Memory (MB): 1024
   

4. To retrieve information about a VMware node vm1, enter:

   rinv vm1
   

   Output is similar to:

   vm1: UUID/GUID: 42198f65-d579-fb26-8de7-3ae49e1790a7
   vm1: CPUs: 1
   vm1: Memory: 1536 MB
   vm1: Network adapter 1: 36:1b:c2:6e:04:02
   vm1: Hard disk 1 (d0): 9000 MB @ [nfs_192.168.68.21_vol_rc1storage_vmware] vm1_3/vm1.vmdk
   vm1: Hard disk 2 (d4): 64000 MB @ [nfs_192.168.68.21_vol_rc1storage_vmware] vm1_3/vm1_5.vmdk
   

   zVM specific :

5. To list the defined network names available for a given node:

   rinv pokdev61 --getnetworknames
   

   Output is similar to:

   pokdev61: LAN:QDIO SYSTEM GLAN1
   pokdev61: LAN:HIPERS SYSTEM GLAN2
   pokdev61: LAN:QDIO SYSTEM GLAN3
   pokdev61: VSWITCH SYSTEM VLANTST1
   pokdev61: VSWITCH SYSTEM VLANTST2
   pokdev61: VSWITCH SYSTEM VSW1
   pokdev61: VSWITCH SYSTEM VSW2
   pokdev61: VSWITCH SYSTEM VSW3
   

6. To list the configuration for a given network:

   rinv pokdev61 --getnetwork GLAN1
   

   Output is similar to:

   pokdev61: LAN SYSTEM GLAN1        Type: QDIO    Connected: 1    Maxconn: INFINITE
   pokdev61:   PERSISTENT  UNRESTRICTED  IP                        Accounting: OFF
   pokdev61:   IPTimeout: 5                 MAC Protection: Unspecified
   pokdev61:   Isolation Status: OFF
   

7. To list the disk pool names available:

   rinv pokdev61 --diskpoolnames
   

   Output is similar to:

   pokdev61: POOL1
   pokdev61: POOL2
   pokdev61: POOL3
   

8. List the configuration for a given disk pool:

   rinv pokdev61 --diskpool POOL1 free
   

   Output is similar to:

   pokdev61: #VolID DevType StartAddr Size
   pokdev61: EMC2C4 3390-09 0001 10016
   pokdev61: EMC2C5 3390-09 0001 10016
   

9. List the known zFCP pool names.

   rinv pokdev61 --zfcppoolnames
   

   Output is similar to:

   pokdev61: zfcp1
   pokdev61: zfcp2
   pokdev61: zfcp3
   

10. List the SCSI/FCP devices contained in a given zFCP pool:

    rinv pokdev61 --zfcppool zfcp1
    

    Output is similar to:

    pokdev61: #status,wwpn,lun,size,range,owner,channel,tag
    pokdev61: used,500512345678c411,4014412100000000,2g,3B40-3B7F,ihost13,3b77,
    pokdev61: used,500512345678c411,4014412200000000,8192M,3B40-3B7F,ihost13,3b77,replace_root_device
    pokdev61: free,500512345678c411,4014412300000000,8g,3B40-3B7F,,,
    pokdev61: free,5005123456789411,4014412400000000,2g,3B40-3B7F,,,
    pokdev61: free,5005123456789411;5005123456789411,4014412600000000,2G,3B40-3B7F,,,
    

SEE ALSO

rpower(1)|rpower.1