bmcdiscover.1

NAME

bmcdiscover - Discover Baseboard Management Controllers (BMCs) using a scan method

SYNOPSIS

bmcdiscover [-? | -h | --help]

bmcdiscover [-v | --version]

bmcdiscover [--sn SN_nodename] [-s scan_method] [-u bmc_user] [-p bmc_passwd] [-z] [-w] --range ip_ranges

DESCRIPTION

The bmcdiscover command will discover Baseboard Management Controllers (BMCs) using a scan method.

The command uses nmap to scan active nodes over a specified IP range. The IP range format should be a format that is acceptable by nmap.

The bmcdiscover command can also obtain some information about the BMC. (Check username/password, IP address source, DHCP/static configuration)

Note: The scan method currently support is nmap.

OPTIONS

--range

Specify one or more IP ranges acceptable to nmap. IP range can be hostnames, IP addresses, networks, etc. A single IP address (10.1.2.3), several IPs with commas (10.1.2.3,10.1.2.10), Ip range with “-” (10.1.2.0-100) or an IP range (10.1.2.0/24) can be specified. If the range is very large, the bmcdiscover command may take a long time to return.

--sn

Specify one or more service nodes on which bmcdiscover will run. In hierarchical cluster, the MN may not be able to access the BMC of CN directly, but SN can. With this option, bmcdiscover will be dispatched to the specified SNs. Then, the nodename of the service node that ‘bmcdiscover’ is running on will be set to the ‘servicenode’ attribute of the discovered BMC node.

-s

Scan method (The only supported scan method at this time is nmap)

-z

List the data returned in xCAT stanza format

-w

Write to the xCAT database.

-i|--bmcip

BMC IP address.

-u|--bmcuser

BMC user name.

-p|--bmcpasswd

BMC user password.

-h|--help

Display usage message

-v|--version

Display version information

RETURN VALUE

0 The command completed successfully.

1 An error has occurred.

EXAMPLES

  1. To get all responding BMCs from IP range “10.4.23.100-254” and 50.3.15.1-2”:
bmcdiscover -s nmap --range "10.4.23.100-254 50.3.15.1-2"

Note: Input for IP range can be in the form: scanme.nmap.org, microsoft.com/24, 192.168.0.1; 10.0.0-255.1-254.

  1. To get all BMCs in IP range “10.4.22-23.100-254”, displayed in xCAT stanza format:
bmcdiscover -s nmap --range "10.4.22-23.100-254" -z
  1. To discover BMCs through sn01:
bmcdiscover --sn sn01 -s nmap --range "10.4.22-23.100-254" -z

Output is similar to:

node-70e28414291b:
    objtype=node
    groups=all
    bmc=10.4.22.101
    cons=openbmc
    mgt=openbmc
    servicenode=sn01
    conserver=sn01
  1. Discover the BMCs and write the discovered-node definitions into the xCAT database and write out the stanza foramt to the console:
bmcdiscover -s nmap --range "10.4.22-23.100-254" -w -z

SEE ALSO

lsslp(1)|lsslp.1